Warning: ini_set(): A session is active. You cannot change the session module's ini settings at this time in /home/zealp1/public_html/lib/pkp/classes/session/SessionManager.inc.php on line 69

Warning: Cannot modify header information - headers already sent by (output started at /home/zealp1/public_html/lib/pkp/classes/session/SessionManager.inc.php:69) in /home/zealp1/public_html/lib/pkp/classes/template/PKPTemplateManager.inc.php on line 1180

Warning: Cannot modify header information - headers already sent by (output started at /home/zealp1/public_html/lib/pkp/classes/session/SessionManager.inc.php:69) in /home/zealp1/public_html/lib/pkp/classes/template/PKPTemplateManager.inc.php on line 1181
Constructions of Toroidal Screw Drums | Journal of Modern Mechanical Engineering and Technology
Skip to main navigation menu Skip to main content Skip to site footer
Journal of Modern Mechanical Engineering and Technology

Articles

Vol. 10 (2023)

Constructions of Toroidal Screw Drums

DOI
https://doi.org/10.31875/2409-9848.2023.10.14
Published
2023-11-16

Abstract

Abstract: Design solutions are presented for the implementation of working chambers in the form of relative toroidal screw drums, intended for the finishing treatment of components in the conditions of rotary-screw technological systems.

References

  1. Akulinichev, Pavel & Zenin, I & Goncharov, A. (2020). Choice of finishing and strengthening treatment method for cycloidal screw surfaces for multi-product production conditions. IOP Conference Series: Materials Science and Engineering. 963. 012013. https://doi.org/10.1088/1757-899X/963/1/012013
  2. Lebedev V., Serga G., Sekisov A. Designs of relative torus screw drums. Mechanical engineering technological systems: Collection of proceedings of the International Scientific and Technical Conference (Azov, May 26-29, 2022) / edited by V. Lebedeva Don State Technical University. - Rostov-on-Don: DSTU, 2022. - pp. 11-16.
  3. Lebedev, Valery & Al-Obaidi, L. & Koval, N. (2022). The finishing and cleaning of long parts in screw rotors. Advanced Engineering Research. 22. 42-49. https://doi.org/10.23947/2687-1653-2022-22-1-42-49
  4. Lebedev, Valery & Serga, G & Khandozhko, A. (2018). Increase of efficiency of finishing-cleaning and hardening processing of details based on rotor-screw technological systems. IOP Conference Series: Materials Science and Engineering. 327. 042062. https://doi.org/10.1088/1757-899X/327/4/042062
  5. Lebedev, Valery & Serga, Georgiy & Belokur, Kirill & Yakovlev, Denis. (2016). Rotary-Helical Technological Systems for Parts Machining. Bulletin of Bryansk state technical university. 2. 132-137. https://doi.org/10.12737/20266
  6. Outlook for using modern rotary screw systems in industry / A. Sekisov, S. Ovchinnikova, M. Kalinichenko [et al.] // IOP Conference Series: Materials Science and Engineering: XIII International Scientific Conference Architecture and Construction 2020, Novosibirsk, 22-24 сентября 2020 года. Vol. 953. - Bristol: IOP Publishing Ltd, 2020. - P. 012084. https://doi.org/10.1088/1757-899X/953/1/012084
  7. Storchak, Michael. (2022). Design of Technological Systems for Gear Finishing. https://doi.org/10.1007/978-3-030-92262-7_9
  8. Zverovshchikov, V.Z. & Nesterov, S.A. & Zverovshchikov, A.V. & Zverovshchikov, A.E. & Steshkin, A.V. (2022). Technological support of centrifugal finishing-hardening and stripping surface treatment of parts. University proceedings. Volga region. Technical sciences. https://doi.org/10.21685/2072-3059-2022-2-10