Journal of Modern Mechanical Engineering and Technology

Articles

Vol. 13 (2026)

Principles of Surface Engineering for Tribological Contact Components Subjected to Complex Dynamic Loading

DOI:
https://doi.org/10.31875/2409-9848.2026.13.09
Submitted
September 19, 2026
Published
2026-10-12

Abstract

The relation between the wear resistance of metal and the structural homogeneity of the surface layer is noted. The principles of surface engineering by using the features of forming the nanostructural state of the surface layer are recommended. A concept for improving the wear resistance of tribological systems is proposed based on the principles of structural adaptation of materials during friction. The results demonstrate the potential for controlling the wear resistance of contacting components through purposeful modification of the surface-layer formation processes.

References

  1. Ryzhov E.V. Contact of Solids under Static and Dynamic Loads. Moscow: Mashinostroenie, 1988.
  2. Ко Р. L. Wear of zirconium alloys due to fretting and periodic impacting. Wear 1979; 55; N 2: 369-384. https://doi.org/10.1016/0043-1648(79)90167-4
  3. Rybakova L.M., Kuksenova L.I. Structure and Wear Resistance of Metal. Moscow: Mashinostroenie, 1982.
  4. Tsyganov V.V., Sheyko S. Features of engineering the wear-resistant surface of parts with the multicomponent dynamic load. Wear 2022; 494-495; 204255. https://doi.org/10.1016/j.wear.2022.204255
  5. Tsyganov V., Ivschenko L. The methodological principles of the engineering of tribocoupling details surface under multicomponent loadin. Materials Science and Technology 2018, MS and T 2018: 578-584. https://doi.org/10.7449/2018/MST_2018_578_584
  6. Tsyganov V. V. Features of mechanics destruction tribounits at difficult dynamic loading. Eurasian Physical Technical Journal 2023; 20; 2 (44): 99-105. https://doi.org/10.31489/2023No2/99-105
  7. Tsyganov V.V., Mokhnach R.E., Sheiko S.P. Increasing wear resistance of steel by optimizing structural state of surface layer. Steel in Translation 2021; 51; 2: 144-147. https://doi.org/10.3103/S096709122102011X
  8. Brazkin V.V., Laypin A.G., Hemely R.J. Harder than diamond: Dreams and realiti. Philos. Mag 2002; A82; 2: 231-253. https://doi.org/10.1080/01418610208239596
  9. Azarenkov N.A., Beresnev V.M., Pogrebnyak A.D. et al. Nanomaterials, Nanocoatings, Nanotechnologies: Textbook. Kharkiv: KhNU, 2009.
  10. Minko N.I., Strokova V.V., Zhernovsky I.V. et al. Methods for obtaining and properties of nanoobjects: textbook. Moscow: Science, 2009.
  11. Birringer R., Gleiter H. Nanocrystalline Materials. Clusters of Atoms and Molecules II Berlin: Springer 1994. https://doi.org/10.1007/978-3-642-84985-5_17
  12. Suzdalev I.P. Nanotechnology: physico-chemistry of nanoclusters, nanostructures and nanomaterials. Moscow: KomKniga, 2006.
  13. Ivshchenko L.I., Tsyganov V.V. Methodological principles of surface engineering for gas turbine unit components subject to complex dynamic contact loading. Technological Systems 2016; 1: 51-59.
  14. Tsyganov V. V., Sheiko S. Study on the influence оf рolymethylmethacrylat on the wearproofness of steel. Journal of Chemical Technology and Metallurgy 2023; 58, 1: 238-243. https://j.uctm.edu/index.php/JCTM/issue/view/2
  15. L.Y. Ivschenko, Tsyganov V.V., Adjerid S. Influence des conditions de chargement dynamique sur la resistance a l’usure des tribocontacts. Journal Materiaux & Techniques 2013; 4: 403.1-403.7. https://www.mattech-journal.org/articles/mattech/abs/2013/04/mt130034/mt130034.html https://doi.org/10.1051/mattech/2013075
  16. Tsyganov V., Sheyko S., Hrechanyi O. et al. Features of the formation of the nanostructural state of the surface layer of steel parts during processing and operation. Journal of Chemical Technology and Metallurgy 2024; 59, 3: 713-720. https://j.uctm.edu/index.php/JCTM/article/view/381/246 https://doi.org/10.59957/jctm.v59.i3.2024.27