Journal of Material Science and Technology Research

Articles

Vol. 13 (2026)

Effect of Filler Particle Size on the Physical and Mechanical Properties of Ceramic Materials

DOI:
https://doi.org/10.31875/2410-4701.2026.13.07
Submitted
September 3, 2026
Published
2026-09-03

Abstract

The effect of a high-alumina filler on the physicomechanical properties of ceramic materials was investigated. It is shown that, by controlling the specific surface area of chamotte and the filler content, high-alumina ceramics can be obtained with sufficient mechanical strength and an optimized pore structure. Under these conditions, the fired ceramic or refractory material exhibits maximum mechanical strength and the highest resistance to failure under thermal loading.

References

  1. Andrianov N.T., Balkevich V.L., Belyakov A.V., Vlasov A.S., Guzman I.Ya. et al. Chemical Technology of Ceramics: Textbook, edited by I.Ya. Guzman. Moscow, RIF “Stroymaterialy” Publ., 2012. 496 p.
  2. Vakalova T.V., Khabas T.A., Reva I.B. Workshop on the Fundamentals of the Technology of Refractory Non-Metallic and Silicate Materials. Tomsk, TPU Publ., 2013. 176 p.
  3. Perepelitsyn V.A., Koroteev V.A., Rytvin V.M., Gilvarg S.I., Grigoriev V.G., Ignatenko V.G., Abyzov A.N. High-alumina technogenic raw material. New Refractories, 2011, No. 4, pp. 5-16.
  4. Astapova E.S., Vanina E.A., Golubeva I.A. Effect of isothermal annealing on the mechanical properties and microstructure of high-alumina ceramics. Physics and Chemistry of Materials Processing, 2008, No. 3, pp. 28-32.
  5. Timokhova M.I., Rachkov V.S., Andrianov M.A. Method for manufacturing high-alumina ceramic articles. USSR Author's Certificate SU 1622341 A1. Invention Bulletin, 1991, No. 3.
  6. Shevchenko V.Ya., Barinov S.M. Technical Ceramics. Moscow, Nauka Publ., 1993. 187 p.
  7. Prutskov D.V., Busko V.M., Alekseev E.V., Vovchenko E.A. Improving the technology for the production of high-alumina refractories. Refractories and Technical Ceramics, 2017, No. 3, pp. 36-39.
  8. Mirziyoyev Sh.M. On measures for the further implementation of promising projects for localizing the production of finished products, components, and materials for 2017-2019. Decree of the President of the Republic of Uzbekistan No. PP-2698, December 26, 2016, Tashkent.
  9. Khamidov R.A., Ergeshov A.M., Khodzhaev N.T., Khakberdiev N.M. Non-Metallic Minerals of Uzbekistan. State Enterprise Institute of Mineral Resources, 2017. 262 p.
  10. Maslennikova G.N., Zhekisheva S.Zh., Kudryashov N.I. Ceramic Raw Materials of Central Asia. Bishkek, “Tekhnologiya” Publ., 2002. 231 p.
  11. Bobkova N.M. Physical Chemistry of Refractory Non-Metallic and Silicate Materials. Minsk, Vysheishaya Shkola Publ., 2007.
  12. Kashcheev I.D., Zemlyanoy K.G. Possibilities of obtaining high-alumina raw materials from technogenic waste for the ceramic and refractory industry (Review). New Refractories, 2019, No. 5, pp. 83-89. https://doi.org/10.17073/1683-4518-2019-5-83-89
  13. Eminov Al.A., Tairov S.S., Sabirov B.T., Eminov A.M. Ceramic body based on kaolin - alumina-containing waste - dolomite system. Glass and Ceramics, 2024, Vol. 81, Nos. 1-2, pp. 62-67. https://doi.org/10.1007/s10717-024-00660-7
  14. Eminov Al.A., Iskandarova M.I., Kadyrova Z.R. Gas processing waste: promising raw material for designing the composition of ceramic grinding bodies. Glass and Ceramics, 2021, Vol. 78, Issue 1-2, pp. 35-39. https://doi.org/10.1007/s10717-021-00344-6
  15. Kadyrova Z.R., Eminov Al.A., Tairov S.S., Eminov A.M. Effect of nanodispersed alumina on the mechanical and physical properties of technical ceramics. Glass and Ceramics, 2025, Vol. 82, Nos. 7-8, pp. 341-344. https://doi.org/10.1007/s10717-025-00796-0
  16. Eminov Al.A., Sobirov B.T., Eminov A.M. Composition of technical ceramics of low-temperature sintering for grinding bodies. Refractories and Industrial Ceramics, 2024, Vol. 64, No. 5, pp. 513-516. https://doi.org/10.1007/s11148-024-00881-x
  17. Eminov Al.A., Kadyrova Z.R., Janabaev O.O., Eminov A.M. Mineral and secondary clay raw material resources for obtaining high-aluminum masses. Journal of Chemical Technology and Metallurgy, 2025, Vol. 60, Issue 3, pp. 427-433. https://doi.org/10.59957/jctm.v60.i3.2025.10
  18. Dyatlova E.M., Biryuk V.A. Chemical Technology of Ceramics and Refractories. Laboratory Workshop. Minsk, BSTU Publ., 2006. 284 p.
  19. Andrianov N.T., Belyakov A.V., Vlasov A.S. et al. Workshop on Technical Ceramics: Textbook for Universities, edited by I.Ya. Guzman. Moscow, OOO RIF “Stroymaterialy”, 2005. 336 p.
  20. Bokhan Yu.I. Mechanical properties of structural ceramics based on Al2O3. Glass and Ceramics, 1996, No. 8, pp. 20-22.

Similar Articles

1-10 of 97

You may also start an advanced similarity search for this article.